Cambium Networks PTP 820 Series, User Manual

Page: 499 / 1149

Chapter 8: Ethernet Protocols Configuring LLDP
phn-3965_006v002
Page 8-44
Displaying Peer Unit’s Management Parameters
To display LLDP management information about the unit's nearest neighbor (peer):
1. Select Ethernet > Protocols > LLDP > Advanced > Remote System > Management . The LLDP Remote System
Management page opens.
Figure 283 LLDP Remote System Management Page
Table 90 describes the LLDP remote system management parameters. These parameters are read-only.
Table 90 LLDP Remote System Management Parameters
Parameter Definition
Local Interface Location The location of the local interface.
Management Address The octet string used to identify the management address component
associated with the remote system.
Address Sub Type The type of management address identifier encoding used in the
associated LLDP Agent Remote Management Address.
Destination Address The peer LLDP agent's destination MAC Address.
Remote ID An arbitrary local integer value used by this agent to identify a particular
connection instance, unique only for the indicated remote system.
Time Mark The time the entry was created.
To display unit parameter information received via LLDP from the unit's nearest neighbor (peer):