Cambium Networks PTP 820 Series, User Manual, Page: 1141 / 1149

Chapter 29: Alarms List Unit/ACT LED – PTP 820F
phn-3965_006v002
Page 29-36
5035 soam-def-xcon-failure Alarm Cross Connect CCM received Major CCM from another MAID
or lower MEG level have
been received Check MA/MEG and MEP
configurations
5036 ptp-stream-state-
change Event 1588-BC port state changed Warning
5037 ptp-bmca-update Event 1588-BC BMCA has been
updated. Warning
5038 ptp-output-squelch Event 1588-BC outputs are
squelched. Warning
5039 ptp-parent-data-set-
change Event 1588-BC parent dataset has
changed. Warning
5040 ptp-utc-offset-change Event 1588-BC UTC offset value
changed. Warning
5041 ptp-leap-seconds-flag-
change Event 1588-BC one of the leap
seconds flags have changed. Warning
5042 ptp-message-interval-
change Event 1588-BC message interval
change detected. Warning
5043 ptp-message-rate-
announce Alarm 1588-BC announce message
rate is below expected. Major Misconfiguration of the
peer system. Check the configuration
of the peer system.
5044 ptp-message-rate-
sync Alarm 1588-BC sync message rate is
below expected. Major Misconfiguration of the
peer system. Check the configuration
of the peer system.
5045 ptp-message-rate-
delay-req Alarm 1588-BC delay request
message rate is below
expected. Major Misconfiguration of the
peer system. Check the configuration
of the peer system.
5046 ptp-no-syncE Alarm 1588-BC performance is
degraded due to loss of
system clock reference. Critical Loss of system clock
reference. Restore the system clock
synchronization to a PRC-
traceable source.