Cambium Networks PTP 820 Series, User Manual, Page: 794 / 1149

Chapter 17: Radio Configuration (CLI) Configuring the Remote Radio Parameters (CLI)
phn-3965_006v002
Page 17-5
Table 157 Remote Radio Mute/Unmute CLI Parameters
Parameter Input Type Permitted Values Description
admin Variable on
off
Mutes (on) or unmutes (off) the
remote unit.
The following command mutes the remote radio:
radio[2/1]>remote-unit mute set admin on
The following command unmutes the remote radio:
radio[2/1]>remote-unit mute set admin off
Displaying the Remote Radio’s RX Level (CLI)
To display the remote radio’s RX level, go to radio view and enter the following command:
radio[x/x]>remote-unit show rx-level
Configuring the Remote Radio’s TX Level (CLI)
To set the transmit (TX) level of the remote radio, go to radio view and enter the following command:
radio[x/x]>remote-unit set tx-level <tx-level>
To display the transmit (TX) level of the remote radio, go to radio view and enter the following command:
radio[x/x]>remote-unit show tx-level
Table 158 Remote Radio TX Level CLI Parameters
Parameter Input Type Permitted Values Description
tx-level Number Depends on the frequency
and unit type. The desired TX signal level (TSL), in
dBm.
The following command sets the TX level of the remote radio to 10 dBm:
radio[2/1]>remote-unit set tx-level 10
Configuring Remote ATPC (CLI)
To set the RX reference level for ATPC on the remote radio, go to radio view and enter the following command:
radio[x/x]>remote-unit atpc set ref-level <ref-level>
To display the RX reference level for ATPC on the remote radio, go to radio view and enter the following command:
radio[x/x]>remote-unit atpc show ref-level
Table 159 Remote Radio ATPC CLI Parameters