Cambium Networks PTP 820 Series, User Manual

Page: 831 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-12
Pipe Service Point Classification (CLI)
Pipe service points can be used with the following Attached Interface Types:
•
Dot1q – All C-VLANs and untagged frames that enter the interface are classified to the same service point.
•
S-Tag – All S-VLANs and untagged frames that enter the interface are classified to the same service point.
MNG Service Point Classification (CLI)
Management service points can be used with the following Interface Types:
•
Dot1q – A single C-VLAN is classified to the service point.
•
S-Tag – A single S-VLAN is classified to the service point.
•
QinQ – A single S-VLAN and C-VLAN combination is classified to the service point.
Table 184 and Table 185 show which service point – Interface Type combinations can co-exist on the same
interface.
Table 184 Legal Service Point – Interface Type Combinations per Interface – SAP and SNP
SP Type SAP SNP
SP
Type Attached
Interface
Type
802.1q
Bundle-
C Bundle-
S
All to One
Q in
Q
802.1q S-Tag
SAP 802.1q Yes Yes No No No No No
Bundle-C Yes Yes No No No No No
Bundle-S No No Yes No Yes No No
All to One No No No Only 1 All to
One SP
Allowed No No No
Q in Q No No Yes No Yes No No
SNP 802.1q No No No No No Yes No
S-Tag No No No No No No Yes
Pipe 802.1q No No No No No No No
S-Tag No No No No No No No
MNG 802.1q Yes Yes No No No Yes No
Q in Q No No Yes No Yes No No
S-Tag No No No No No No Yes
Table 185 Legal Service Point – Interface Type Combinations per Interface – Pipe and MNG