Cambium Networks PTP 820 Series, User Manual, Page: 850 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-31
To perform a global flush of the MAC address forwarding table, enter the following command:
root> ethernet service mac-learning-table set global-flush
Enabling MAC Address Learning on a Service Point (CLI)
You can enable or disable MAC address learning for specific service points. By default, MAC learning is enabled.
To enable or disable MAC address learning for a service point, go to service view for the service and enter the
following command:
service[SID]>sp learning-state set spid <sp-id> learning <learning>
Table 200 Enabling MAC Address Learning CLI Parameters
Parameter Input Type Permitted Values Description
sp-id Number 1-32 for P2P and MP
services.
1-30 for MNG
services. The Service point ID.
learning Variable enable
disable Select enable or disable to enable or
disable MAC address learning for frames
that ingress via the service point. When
enabled, the service point learns the
source MAC addresses of incoming frames
and adds them to the MAC address
forwarding table.
The following command enables MAC address learning for Service Point 1 on Service 37:
service[37]>sp learning-state set spid 1 learning enable
The following command disables MAC address learning for Service Point 1 on Service 37:
service[37]>sp learning-state set spid 1 learning disable