Cambium Networks PTP 820 Series, User Manual, Page: 243 / 1149

Chapter 3: Configuration Guide Configuring Link Aggregation (LAG) and LACP
phn-3965_006v002
Page 3-85
Figure 98 LAG Page (Empty)
2. Click Create Group underneath the Link Aggregation table. The Create LAG page opens.
Figure 99 Create LAG Group Page
3. In the Group ID field, select a LAG Group ID. Only LAG IDs that are not already assigned to a LAG group
appear in the dropdown list.
4. In the LACP field, select Enable to enable LACP on the LAG or Disable to disable LACP on the LAG. The
default value is Disable .
5. In the LAG Member 1 field, select an interface to assign to the LAG group. Only interfaces not already
assigned to a LAG group appear in the dropdown list.
6. Click Next. A new Create LAG Group page opens.
7. In the Member 2 field, select an additional interface to assign to the LAG Group.
8. To add additional interfaces to the LAG group, repeat steps 6 and 7.