Cambium Networks PTP 820 Series, User Manual, Page: 577 / 1149

Chapter 9: TDM Services and Interfaces Configuring Advanced Pseudowire Parameters
phn-3965_006v002
Page 9-69
Figure 337 PseudoWire Services – Information Page
Table 110 describes the pseudowire TDM service status parameters.
To clear the statistics, click Clear Statistics at the bottom of the page.
Table 110 Pseudowire TDM Service Status Parameters
Parameter Definition
Shelf Slot ID Slot 1.
Service ID A unique ID that identifies the service. Once you have added the service,
you cannot change the Service ID.
Operational Status Displays the current operational state of the service ( Up or Down ). If no
traffic is currently passing through the service, the Operational Status
displays Down . This does not necessarily mean there is anything wrong
with the unit or the configuration of the service.
Tx Packets The number of transmitted packets.
Rx Packets The number of received packets.
LOPS Transitions The number of transitions from normal state to Loss of Packet
Synchronization (LOPS) state.
Jitter Buffer Overruns The number of jitter buffer overruns.
Jitter Buffer Deviations The maximum jitter buffer deviation.
Minimum Jitter Buffer Count The minimum jitter buffer usage registered for the previous second.