Cambium Networks PTP 820 Series, User Manual, Page: 304 / 1149

Chapter 4: Unit Management Backing Up and Restoring Configurations
phn-3965_006v002
Page 4-29
Figure 147 FTP Parameters Page (Configuration Management)
5. In the File transfer protocol field, select the file transfer protocol you want to use ( FTP or SFTP ).
6. In the Username field, enter the user name you configured in the FTP server.
7. In the Password field, enter the password you configured in the FTP server. If you did not configure a
password for your FTP user, simply leave this field blank.
8. If the IP address family is configured to be IPv4, enter the IPv4 address of the PC or laptop you are using as the
FTP server in the
Server IP address field. See Defining the IP Protocol Version for Initiating Communications.
9. If the IP address family is configured to be IPv6, enter the IPv6 address of the PC or laptop you are using as the
FTP server in the
Server IPv6 address field. See Defining the IP Protocol Version for Initiating Communications.
10. In the Path field, enter the location of the file you are downloading or uploading. If the location is the root
shared folder, it should be left empty. If the location is a sub-folder under the root shared folder, specify the
folder name. If the shared folder is "C:\", this parameter can be left empty or populated with "//"..
11. Click Apply, then Close, to save the FTP parameters and return to the Configuration Management page.
12. In the File name field, enter the name of the file you are importing, or the name you want to give the file
you are exporting.
Note
You must add the suffix .zip to the file name. Otherwise, the file import may fail. You can export the
file using any name, then add the suffix .zip manually.
13. Click Apply , then Close , to save the FTP parameters and return to the Configuration Management page.
14. In the File number field, select from three system restore points:
o
When you import a configuration file, the file is saved to the selected restore point, and overwrites
whichever file was previously held in that restore point.
o
When you export a configuration file, the file is exported from the selected restore point.
o
When you back up the current configuration, the backup configuration file is saved to the selected restore
point, and overwrites whichever file was previously held in that restore point.