Cambium Networks PTP 820 Series, User Manual

Page: 430 / 1149

Chapter 7: Quality of Service (QoS) Configuring Policers (Rate Metering)
phn-3965_006v002
Page 7-19
2. Select the interface in the Ethernet Logical Port Configuration table and click Policers . The Policers page
opens. By default, the Policers page opens to the Unicast Policer table ( Figure 226 ).
3. Select Broadcast Policer . The Broadcast Policer table appears.
Figure 228 Logical Interfaces – Policers Page – Broadcast Policer
4. In the Policer profile field, select a profile from the policer profiles defined in the system. The Policer profile
drop-down list includes the ID and description of all defined profiles.
5. In the Broadcast admin field, select Enable to enable policing on broadcast traffic flows from the logical
interface, or Disable to disable policing on broadcast traffic flows from the logical interface.
6. Click Apply .
Assigning Ethertype Policers
You can define up to three policers per Ethertype value.
To assign a policer to an Ethertype:
1. Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 214 ).
2. Select the interface in the Ethernet Logical Port Configuration Table and click Policers . The Policers page
opens. By default, the Policers page opens to the Unicast Policer table ( Figure 226 ).
3. Select Ethertype type 1 Policer . The Ethertype type 1 Policer table appears.
Figure 229 Logical Interfaces – Policers Page – Ethertype Policer