Cambium Networks PTP 820 Series, User Manual

Page: 405 / 1149

Chapter 6: Ethernet Services and Interfaces Viewing Ethernet PMs and Statistics
phn-3965_006v002
Page 6-34
Port TX Statistics
The Ethernet Port TX PM report page displays PMs that measure various peak transmission rates (in seconds) and
average transmission rates (in seconds), both in bytes and in packets, for each measured time interval.
The page also displays the number of seconds in the interval during which transmission rates exceeded the
configured threshold.
This section includes:
•
Displaying Ethernet Port TX PMs
•
Enabling or Disabling Gathering of Port TX PM Statistics per Interface
•
Setting the Ethernet Port TX Threshold
Displaying Ethernet Port TX PMs
To display Ethernet Port TX PMs:
1. Select Ethernet > PM & Statistics > Port TX . The Ethernet Port TX PM Report page opens.
Figure 207 Ethernet Port TX PM Report Page
2. In the Interface field, select the interface for which you want to display PMs.
3. In the Interval Type field:
o
To display reports for the past 24 hours, in 15 minute intervals, select 15 minutes .
o
To display reports for the past month, in daily intervals, select 24 hours .
Table 68 describes the Ethernet TX port PMs.