Cambium Networks PTP 820 Series, User Manual

Page: 1128 / 1149

Chapter 29: Alarms List Unit/ACT LED – PTP 820F
phn-3965_006v002
Page 29-23
2008 pwe3-pws-s-late-
frame Alarm Late-frame alarm on TDM
service Warning Something wrong on
TDM service Check TDM service
configuration
2009 pwe3-pws-s-loss-of-
frames Alarm Loss-of-frames alarm on TDM
service Major Failure along the network
path of TDM service Check network or
configuration for errors in
the network transport
side of the service
2010 pwe3-pws-s-
malformed-frames Alarm Malformed-frames alarm on
TDM service Major Payload size does not
correspond to the
defined value.
Mismatch in PT value in
RTP header (if used)
Check TDM service
configuration
2011 pwe3-pws-s-
misconnection Alarm Misconnection alarm on TDM
service Major Stray packets with wrong
RTP configurations are
received and dropped. Check TDM service
configuration
2012 pwe3-tdm-port-s-ais Alarm Alarm Indication Signal (AIS)
on TDM-LIC TDM port Major Line is not properly
connected.
External equipment is
faulty.
Reconnect line.
Check line cables.
Check external
equipment.
2013 pwe3-tdm-port-s-lof Alarm Loss Of Frame (LOF) on TDM-
LIC TDM port Major Line is not properly
connected.
External equipment is
faulty.
2014 pwe3-tdm-port-s-lomf Alarm Loss Of Multi-Frame (LOMF)
on TDM-LIC TDM port Major Line is not properly
connected.
External equipment is
faulty.
Reconnect line.
Check line cables.
Check external
equipment.
2015
pwe3-tdm-port-s-
loopback-alarm
Alarm
Loopback on TDM-LIC TDM
port
Warning
Line is not properly
connected.
Reconnect line.
Check line cables.