Cambium Networks PTP 820 Series, User Manual, Page: 946 / 1149

Chapter 20: Ethernet Protocols (CLI) Configuring MSTP (CLI)
phn-3965_006v002
Page 20-23
Parameter Input Type Permitted Values Description
interface Variable eth
radio
pwe Enter the type of interface:
eth
– Ethernet
radio – Radio
pwe
– TDM
slot Number 1
port Number ethernet: 1-6
radio: 1-2
management: 1-2
tdm: 1 The interface you want to configure.
group Variable rp1
rp2
rp3
rp4
lag1
lag2
lag3
lag4
mc-abc1
mc-abc2
mc-abc3
mc-abc4 To configure or display parameters for a
LAG group, or a Multi-Carrier ABC group,
use this parameter instead of the interface,
slot, and port parameters to identify the
group. See:
•
Configuring HSB Radio Protection (CLI)
•
Configuring Link Aggregation (LAG) and
LACP
(CLI)
•
Configuring Multi-Carrier ABC (CLI)
cist-port-
priority
Number
0-240, in multiples
of 16. The priority contained in the first octet of
the two-octet Port ID.
cist-port-path-
cost Number 1-200000000. The configurable assigned value for the
contribution of this port to the path cost of
paths towards the spanning tree root.
Note: Changing the value of this
parameter is considered to be a topology
change by the MSTP mechanism.
cist-port-
edge-port Variable true
false
true
– The port is considered an edge port
in the CIST.
false – The port is considered a non-edge
port in the CIST.