Cambium Networks PTP 820 Series, User Manual, Page: 134 / 1149

Chapter 2: Getting Started Enabling the Interfaces (Interface Manager)
phn-3965_006v002
Page 2-39
Figure 34 Interface Manager Page – PTP 820G
To enable or disable an individual interface:
1 Select the interface in the Interface Manager table.
2 Click Edit . The Interface Manager – Edit page opens.
Figure 35 Interface Manager – Edit Page
3 In the Admin status field, select Up to enable the interface or Down to disable the interface.
4 Click Apply , then Close .
To enable or disable multiple interfaces:
1 Select the interfaces in the Interface Manager table or select all the interfaces by selecting the check box in
the top row.
2 In the Multiple Selection Operation section underneath the Interface Manager Table, select Admin status -
Up or Admin status – Down .