Cambium Networks PTP 820 Series, User Manual, Page: 445 / 1149

Chapter 7: Quality of Service (QoS) Configuring Egress Shaping
phn-3965_006v002
Page 7-34
6. In the Shaper Admin field, select Enable to enable egress queue shaping for the selected queue, or Disable
to disable egress queue shaping for the selected queue.
7. Click Apply , then Close .
To assign a different queue shaper profile to a queue:
1. Select Ethernet > Interfaces > Logical Interfaces . The Logical Interfaces page opens ( Figure 214 ).
2. Select an interface in the Ethernet Logical Port Configuration table and click Shaper . The Logical Interfaces –
Shaper page opens, with the Egress Queue Shaper Configuration table open by default ( Figure 242 ).
3. Select an interface in the Ethernet Logical Port Configuration table and click Shaper . The Logical Interfaces –
Shaper page opens, with the Egress Queue Shaper Configuration table open by default ( Figure 242 ).
4. Select the row you want to edit and click Edit . The Egress Queue Shaper Configuration – Edit page opens. This
page is similar to the Egress Queue Shaper Configuration – Add page ( Figure 243 ).
5. To assign a different egress queue shaper profile, select the profile in the Profile ID field.
6. To enable or disable egress queue shaping for the selected queue, select Enable to enable egress queue
shaping for the queue, or Disable to disable egress queue shaping for the queue.
7. Click Apply , then Close .