Cambium Networks PTP 820 Series, User Manual, Page: 849 / 1149

Chapter 18: Ethernet Services and Interfaces (CLI) Configuring Ethernet Services (CLI)
phn-3965_006v002
Page 18-30
Table 199 Adding Static Address to MAC Address Forwarding Table CLI Parameters
Parameter Input Type Permitted Values Description
static mac Six groups of two
hexadecimal digits The MAC address.
sp-id Number 1-32 The Service Point ID of the service
point associated with the MAC
address.
The following command adds MAC address 00:11:22:33:44:55 to the MAC address forwarding table for Service 10,
and associates the MAC address with Service Point ID 1 on Service 10:
service[10]>service mac-learning-table set-static-
mac 00:11:22:33:44:55 spid 1
The following command deletes MAC address 00:11:22:33:44:55, associated with Service Point 1, from the MAC
address forwarding table for Service 10:
service[10]>service mac-learning-table del-static-
mac 00:11:22:33:44:55 spid 1
Displaying the MAC Address Forwarding Table (CLI)
You can display the MAC address forwarding table for an interface, a service, or for the entire unit.
To display the MAC address forwarding table for a service, go to service view for the service and enter the
following command:
service[SID]>service mac-learning-table show
To display the MAC address forwarding table for an interface, go to interface view for the interface and enter the
following command:
eth type xxx[x/x]>mac-learning-table show
To display the MAC address forwarding table for the entire unit, enter the following command:
root> ethernet generalcfg mac-learning-table show
For example, to display the MAC address forwarding table for GbE 1, enter the following commands:
root> ethernet interfaces eth slot 1 port 1
eth type eth[1/1]>mac-learning-table show
Flushing the MAC Address Forwarding Table (CLI)
You can perform a global flush on the MAC address forwarding table. This erases all dynamic entries for all
services. Static entries are not erased.
Note
The ability to flush the MAC address forwarding table per-service and per-interface is planned for
future release.