Cambium Networks PTP 820 Series, User Manual, Page: 320 / 1149

Chapter 5: Radio Configuration Viewing the Radio Status and Settings
phn-3965_006v002
Page 5-6
Parameter Definition
RX Frequency The configured RX radio frequency. The RX radio frequency is configured
in the Frequency control (Local) section of the Radio Parameters page.
See
Configuring the Radio Parameters .
Part Number The part number of the RFU connected to the radio interface.
Serial-Number The serial number of the RFU connected to the radio interface.
Running Software Version The software version currently running on the RFU connected to the radio
interface.
XPIC support Indicates whether the RFU supports Cross Polarization Interference
Canceller (XPIC). For instructions on configuring XPIC, see
Configuring
XPIC .
Radio interface
operational status Indicates whether the radio is operational (Up) or not operational
(Down).
Operational TX Level
(dBm) The actual TX signal level (TSL) of the RFU (in dBm).
RX Level (dBm) The actual measured RX signal level (RSL) of the RFU (in dBm).
Modem MSE (dB) The MSE (Mean Square Error) of the RX signal, measured in dB. A value of
-9900 (-99.00 dB ) means that the modem is not locked.
Modem XPI (dB) The current XPI (Cross Polar Interference) level. The value is valid only
when the modem is locked on a signal.
Defective Blocks The number of defective radio blocks that have been counted.
Click Clear Counter to reset this counter.
TX Mute Status Indicates whether radio transmission is muted.
Temperature The current temperature of the RFU.