Brother Ensemble PDP-100J Owner'S Manual Download Page 343

Page: 343 / 440

Games 319

Changing the Scoring

Solitaire has the following scoring options:

Standard (Timed) and Standard (Untimed).

In Standard (Timed),

you lose points for the time you spend deciding where to move a card.

In Standard (Untimed), you are not penalized for taking time to make

decisions. Standard (Timed) and Standard (Untimed) games are scored

as shown in the following table:

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

If you . . .

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

You get . . .

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Let ten seconds pass.

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Ć1 point

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Move a card to one of the

four upper stacks.

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

+10 points

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Flip a card in the lower

stacks.

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

+5 points

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Move a card from the disĆ

card deck to one of the lowĆ

er stacks.

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

+5 points

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Start through the discard

deck again (one-card draw).

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Ć30 the first two times; Ć60, Ć90,

and so on, each time thereafter

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Start through the discard

deck again (two-card draw).

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Ć20 the first three times; Ć40, Ć60,

and so on, each time thereafter

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Start through the discard

deck again (three-card

draw).

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

Ć10 the first four times; Ć20, Ć30,

and so on, each time thereafter

Vegas.

In this scoring option, your game starts when you choose

Re-Deal from the Game menu. You start each Vegas game already 52

points in the hole, and for each re-deal you lose another 52 points.

For each card you successfully move to an upper stack, you receive

five points. Points are cumulative from game to game. You are also

limited to how many times you can go through the discard deck: only

once with one-card draw; twice with two-card draw; and three times

with three-card draw.

Countdown.

In this scoring option, you play against the clock. Your

goal is to score as many points as possible in seven minutes. You can

change the allotted time using the Set Countdown Time option in the

Options menu. For more information about changing your Solitaire

options, see Changing Other Options" later in this chapter.

No Scoring.

In this scoring option, you simply play the game until you

win or are ready to stop. You do not receive any points, nor are you

penalized any points. In addition, elapsed time is not shown when you

choose No Scoring.

To change the scoring:

1. Choose Scoring from the Options menu.

2. Select a choice from the Scoring submenu.

Summary of Contents for Ensemble PDP-100J








































































































































































































































































































































































































































Search results

Summary of Contents for Ensemble PDP-100J

Reviews:

Related manuals for Ensemble PDP-100J

Brands by name

Popular brands

Brother Ensemble PDP-100J, Owner'S Manual

Search results

Summary of Contents for Ensemble PDP-100J

Reviews:

Related manuals for Ensemble PDP-100J

Brands by name

Popular brands