manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 98 / 351

Share
Download
Bay Networks 5391 Manual Download Page 98

Managing Remote Access Concentrators Using Annex Manager

Chapter 4    Setting Up RACs

4-24

•

The

Dedicated

 box box uses the

Host Address

 field and the

Method

 box:

–

The

 Host Address

 field contains the IP address of a host to

which this port will connect.

–

The

Method

 box selects the application to which a RAC port

can connect. You can select

Rlogin

 or

Telnet

.

The Edit Async Ports (continued) Window

The

Edit Async Ports (continued)

 window provides access to additional port

settings in

PPP Security, Time,

 and

LAT

 boxes.

Figure 4-7. Edit Async Ports (continued) Window

PPP Security Box

The

PPP Security

 box defines security on PPP ports using the following

fields:

W

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments