Bay Networks 5391 Manual Download Page 151

Page: 151 / 351

7-3

Chapter 7 Configuring RAC Parameters

Managing Remote Access Concentrators Using Annex Manager

Figure 7-1. User Defined Parameter Groups Window

The

Parameters

box includes an option button and the list box.

The option button controls the parameter list that displays
below it. Select one of the options:

•

The

Annex Only List

option includes all parameters,

excluding port parameters. This is the default option.

•

The

Async Port List

option displays asynchronous port

parameters.

•

The

Printer Port List

option includes printer port parameters.

•

The

Enet Port List

option displays Ethernet port parameters.

•

The

DS0 Channel List

option displays DS0 Channel

parameter values.

•

The

DS1 Line List

option displays DS1 port parameter values.

The parameters associated with the list you select appear in the

Parameters

box.

Select the parameters you want to include in the new group
from the

Parameters

box and click

Add

The selected parameters appear in the

Work Area

box.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 151 / 351

Search results

Summary of Contents for 5391

Reviews: