manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 37 / 351

Share
Download
Bay Networks 5391 Manual Download Page 37

3-1

Managing Remote Access Concentrators Using Annex Manager

Chapter 3

Determining RAC Status

A

nnex Manager retrieves information about the status of a RAC or

an Annex, its ports, and its interfaces. Status commands display hardware
and software information as well as basic performance statistics. In
addition, Annex Manager provides the

Discover Annexes

 command. This

command identifies all RACs known to a search device by retrieving its
routing table. This chapter tells you how to:

•

Display RAC or Annex Status Information

•

Display Asynchronous Port Status Information

•

Display Interface Status Information

•

Display PRI Channels Status Information

•

Display PRI Internal CSU Status Information

•

Display T1 Internal CSU Status Information

•

Display T1 Modem Calls Status Information

•

Display DVS Status Information

•

Identify RACs or Annexes

All status windows are snapshots of current values: status commands
do not provide active polling of data. These commands and the

Discover Annexes

 command provide information for display only and

do not change RAC configurations.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments