manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 333 / 351

Share
Download
Bay Networks 5391 Manual Download Page 333

C-19

Appendix C    Windows Tutorial

Managing Remote Access Concentrators Using Annex Manager

Message and Output Boxes

Message and output boxes display details about Annex Manager
processing: their contents report on the operations you use and can include
error and status messages. You cannot enter information in these boxes.

Message boxes monitor Annex Manager operations by displaying status
and error information. Figure C-6 shows the

 Set Window

 message box

.

Figure C-6. Set Window Message Box

This message box summarizes the

Show Values

 command. The

Show Values

command lists each parameter and notifies you that Annex Manager
completed the

Show Values

 request.

Output boxes show the results of Annex Manager commands. Like
message boxes, output boxes can include error and status messages.
Figure C-7 shows the Compare output box for two RACs.

W

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments