manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 47 / 351

Share
Download
Bay Networks 5391 Manual Download Page 47

3-11

Chapter 3    Determining RAC Status

Managing Remote Access Concentrators Using Annex Manager

Statistics Box

The

Statistics

 box displays statistics related to traffic on each interface.

This box uses a separate line for information about incoming and outgoing
traffic. It includes the following categories:

•

Intf Name

 provides a text description of the interface.

•

Octets

 shows the total number of octets received or transmitted

on the interface, including framing characters.

•

Ucast Pkts

 lists the number of subnetwork-unicast packets

received from or delivered to a higher-layer protocol.

•

NUcast Pkts

 lists the number of subnetwork-broadcast or

subnetwork-multicast packets received from or sent to a higher-
layer protocol.

•

Discards

 displays the number of inbound or outbound packets

that could not be delivered to a higher-layer protocol. Packets
may not have errors and be discarded due to lack of buffer
space.

•

Errors

 provides the number of packets that could not be received

or transmitted due to errors.

•

Unknown Protocols

 lists the number of inbound packets discarded

because of unknown or unsupported protocols.

•

Queue Length

 displays the number of outbound packets in the

packet queue.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments