Bay Networks 5391 Manual Download Page 38

Page: 38 / 351

Managing Remote Access Concentrators Using Annex Manager

Chapter 3 Determining RAC Status

3-2

Displaying RAC Status Information

This section tells you how to display basic information about a single
RAC or Annex.

To display information about a single RAC:

Create a RAC list (page 2-1).

Select a single RAC from the list.

You cannot get status information for more than one device at a
time.

On the Status menu, click

Annex Status.

The

Annex Status

window appears (

Figure 3-1

). The name of the

RAC you selected appears in the window title bar. The fields in this
window are described in The Annex Status Window on page 3-3.

Figure 3-1. Annex Status Window

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 38 / 351

Search results

Summary of Contents for 5391

Reviews: