manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 253 / 351

Share
Download
Bay Networks 5391 Manual Download Page 253

A-63

Appendix A    RAC Parameters

Managing Remote Access Concentrators Using Annex Manager

modem_type

specifies the type of modem attached to the asynchronous port. If you enter a
type that does not match the

type_of_modem

 field in the configuration file that

was read most recently, the RAC logs a warning message. For more information
about the configuration file modem management, see Managing Remote Annex
Concentrators Using CLI Interfaces.

mop_login_password

specifies the password for all ports using a VMS interface. This parameter works
only when

cli_interface

 is set to

vci

 and

vci_login_port_password

 is set to

enabled

. For

security reasons, Annex Manager displays values as

set

 or

unset

.

mop_login_prompt

defines the prompt that appears for all ports using a VMS interface. This
parameter works only when

cli_interface

 is set to

vci

.

Type

Async

Values

cli, slave, adaptive, unused, slip, call, dedicated, ppp, arap,
auto-detect, auto-adapt, ndp, ipx, connect, rlogin, Telnet,
tn3270

Default

cli

Lists

Async Port, AppleTalk, Basic Async Port, Dedicated Port,
IPX, Modem, PPP, SLIP, TN3270

Type

Async

Values

0 to 16 characters

Default

n/a

Lists

Async Port, Modem

Type

RAC

Values

0 to 16 characters

Default

unset

Lists

RAC Only, MOP

Type

RAC

Values

0 to 16 characters

Default

#

Lists

RAC Only, MOP

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments