manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 285 / 351

Share
Download
Bay Networks 5391 Manual Download Page 285

A-95

Appendix A    RAC Parameters

Managing Remote Access Concentrators Using Annex Manager

sysLocation

identifies the physical location of this node (e.g., third floor lab).

sysName

contains the fully-qualified domain name of this node.

sys_location

supplies host location or identification information for the LAT protocol.

syslog_facility

defines the local facility to which the UNIX

syslogd

 daemon sends RAC syslog

messages. Refer to the Managing Remote Access Concentrators Using CLI
Interfaces for a detailed syslog configuration description, and to your UNIX
system documentation.

syslog_host

contains the IP address of the host that logs RAC messages. If you use the Annex
Manager default setting (

0.0.0.0)

, the RAC broadcasts its log messages.

Type

RAC

Default

n/a

Values

0 to 255 characters

Lists

RAC Only

Type

RAC

Default

n/a

Values

0 to 255 characters

Lists

RAC Only

Type

RAC

Values

0 to 32 characters

Default

“ “ (null string)

Lists

RAC Only, LAT

Type

RAC

Values

log_local0 to log_local7

Default

log_local7

Lists

RAC Only, Syslog

Type

RAC

Values

IP Address

Default

0.0.0.0

Lists

RAC Only, SysLog

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments