manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 137 / 351

Share
Download
Bay Networks 5391 Manual Download Page 137

5-7

Chapter 5    Booting and Resetting RACs

Managing Remote Access Concentrators Using Annex Manager

•

Abort

 stops a scheduled boot: the message indicates that the

boot is cancelled. For example, if you cancel the boot
scheduled for 11:50 a.m. on Thursday, the message reads

Annex

(emma) boot at 11:50 is canceled

.

•

Quiet

 no boot messages are sent.

For all options except

Quiet

, add your own message using the

Boot Message

field. If you create your own message its text follows the standard boot
message.

Resetting a RAC Configuration

This section tells you how to change a specific RAC or port configuration
without booting, thereby resetting port and interface settings, several
configuration file options, and name servers.

To reset a RAC:

1.

Create a RAC list and select one or more RACs (page 2-1).

2.

Select the Configure menu and click

Reset

.

The

Reset

 window displays (

Figure 5-3

).

3.

Choose the

Reset Option

 you need.

You can select one option. For information about these options,
refer to Managing Remote Access Concentrators Using Command
Line Interfaces.

Reset

 terminates active connections to a RAC when you use the

All

,

All Async Ports

,

All Printer Ports

,

All Virtual Ports

,

All T1 DS1 Ports

(Hard)

,

All T1 DS1 Ports (Soft)

,

All Internal Modems

,

Individual Ports

and

Individual Internal Modems

 options.

If you selected the

Individual Ports

 or the

Individual Internal

Modems

 option, continue to step 4. For all other

options, skip step 4 and go to step 5.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments