Bay Networks 5391 Manual Download Page 73

Page: 73 / 351

3-37

Chapter 3 Determining RAC Status

Managing Remote Access Concentrators Using Annex Manager

•

The

*** End of discovery ***

message, informing you that the

process is complete.

Finding RACs Using an Internet Address and
Subnet Mask

To find available RACs on a network using a network address and subnet
mask and add them to the

Main

window

Annex List

box:

Select

Discover Annexes

from the Configure menu and then

choose

Network

The

Discover Annexes/Network

window appears (

Figure 3-11

Figure 3-11. Discover Annexes/Network Window

Enter an

Internet Address

and a

Subnet Mask

for the network you

want to search.

You must complete both the

Internet Address

and the

Subnet Mask

fields.

Enter a number of seconds in the

Timeout

field.

This field uses a 10-second default if you leave the field blank.

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 73 / 351

Search results

Summary of Contents for 5391

Reviews: