manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 303 / 351

Share
Download
Bay Networks 5391 Manual Download Page 303

B-7

Appendix B    Configuring and Editing Scripts

Managing Remote Access Concentrators Using Annex Manager

Figure B-3. Script Port Entry Window

This window allows you to specify one or more port or channel
numbers that Annex Manager uses to create a script. The

Script Port

Entry

 window includes:

•

All port or channel types and a port or channel number field for
each type. Annex Manager highlights one or more port or
channel types based on the RAC and options you selected. You
can enter one or more port or channel numbers or a range of
numbers for any highlighted type. For example, if the
configuration has no printer ports, the

Printer Port(s)

 field does

not accept port numbers.

•

Buttons that allow you to define wildcard characters. If you
entered a single port or channel number in all fields above, you
can create a script with wildcard indicators:

–

Use the specified port number

 uses only the port or channel

numbers you entered as part of the new script. This button
is the default.

–

Create wildcard port entries

 enters an asterisk (*) as the script

port or channel number and allows you to use the script for
any port number you enter in the

Execute Script

 command.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments