Bay Networks 5391 Manual Download Page 152

Page: 152 / 351

Managing Remote Access Concentrators Using Annex Manager

Chapter 7 Configuring RAC Parameters

7-4

If you add a parameter and then decide you do not need
it in the group, select it in the

Work Area

box

and click

Remove

Click

Create

The

Name Entry

window appears (

Figure 7-2

Figure 7-2. Name Entry Window

Enter a name for the group.

You must enter a new name without using spaces in the field

Enter

parameter group name

Click

to create the new group or

Cancel

to return to the

User-

defined Parameter Groups

window.

Modifying a Parameter Group

You can modify an existing parameter group by adding or removing
parameters from the group.

You can modify only groups that you created.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 152 / 351

Search results

Summary of Contents for 5391

Reviews: