Bay Networks 5391 Manual Download Page 185

Page: 185 / 351

8-11

Chapter 8 Configuring Modems

Managing Remote Access Concentrators Using Annex Manager

Figure 8-8. Set WAN Internal Modems Window

Select one or more modems from the

Modems List

box.

Choose the

Modem Status

you need.

If you are setting modems to

Available

you can skip this step.

Click

Apply

Annex Manager changes status for the modems you selected.

Click

to close the window.

The Set WAN Internal Modems Window

You use the

Set WAN Internal Modems

window to view the current status of

individual internal modems or to change the status of one or more
modems. This window uses a list box and radio buttons.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 185 / 351

Search results

Summary of Contents for 5391

Reviews: