Bay Networks 5391 Manual Download Page 158

Page: 158 / 351

Managing Remote Access Concentrators Using Annex Manager

Chapter 7 Configuring RAC Parameters

7-10

Figure 7-5. Set Window

Optionally click

Show Values

The

Work Area

displays values for the parameters you selected. The

Message Box

lists each parameter name. You can skip this step if

you do not want to see current values.

If you selected RACs, ports, or channels that do not have the same
parameter value, the

Disp Diffs

button displays in the

Work Area

of the

Set

window. Click

Disp Diffs

to display the

Set (differing values)

window (

Figure 7-6

). The window displays the parameter value for

each RAC and port or channel. It scrolls automatically to the
parameter you selected. You can use scroll bars to view other
parameter values.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 158 / 351

Search results

Summary of Contents for 5391

Reviews: