manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 131 / 351

Share
Download
Bay Networks 5391 Manual Download Page 131

5-1

Managing Remote Access Concentrators Using Annex Manager

Chapter 5

Booting and Resetting RACs

When you change parameters for one or more RACs on the network, the
RACs do not automatically updated to reflect the new information. You
must boot the affected RACs to update them.

You can also change a specific RAC or port configuration without booting,
thereby resetting port and interface settings, several configuration file
options, and name servers.

When you intend to boot or reset RACs, you should broadcast a message
to users of terminals connected to these RACs, letting them know about
the boot and updates.

This chapter describes how to:

•

Boot a RAC

•

Reset a RAC configuration

•

Broadcast messages

Booting a RAC

When you change parameter values use the

Boot

 or

Reset

 commands to

apply the new RAC configurations.

You can boot one or more active RACs. You can choose to boot RACs
immediately, set a time in the future for the boot to take place, and send
an explanatory message to all users. Annex Manager changes values for
the

Pref Load Addr

 and

Pref Dump Addr

 parameters before the boot takes place.

The

Boot

 command terminates all active connections to a RAC. You

cannot return to the main window once you display the

Boot

 window.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments