Bay Networks 5391 Manual Download Page 120

Page: 120 / 351

Managing Remote Access Concentrators Using Annex Manager

Chapter 4 Setting Up RACs

4-46

Set up security for the selected RACs as desired.

Optionally click

Restore

to reset all fields to the previous values.

(If you have already clicked

Apply

you cannot do this.)

Click

Apply

Annex Manager sets security for the selected RACs.

Click

to close the window.

The Security Window

If the RACs you selected in the

Main

window currently use this security

system, the

button for Modem Ports, Non-modem Ports, WAN Calls,

Restrict, and Security is selected when this window first appears. In this
case the

enable_security

parameter is set to

enabled

. If you change these

settings to

Off,

Annex Manager deactivates security but does not change

the

enable_security

parameter setting.

Incoming Box

The

Incoming

box controls security for incoming modem ports, non-

modem ports, and WAN Calls.

The

and

Off

buttons control security for the RACs you selected in the

Main

window. If you choose

, Annex Manager activates the ACP

security server, including security for AppleTalk, CLI, IPX, and SLIP/
PPP connections.

Modem Ports and Non-modem Ports do not apply for ISDN Primary Rate
RACs. WAN Calls does not apply for RACs with asynchronous ports.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 120 / 351

Search results

Summary of Contents for 5391

Reviews: