manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 142 / 351

Share
Download
Bay Networks 5391 Manual Download Page 142

Managing Remote Access Concentrators Using Annex Manager

Chapter 5    Booting and Resetting RACs

5-12

Broadcasting Messages

When you intend to boot or reset RACs, you should send a message to
all terminals connected to the affected RACs, letting users know of the
upcoming operation.

This section tells you how to communicate quickly with all terminals
connected to the RACs you select to boot or reset.

To send a message:

1.

Create a RAC list and select one or more RACs (page 2-1).

2.

Select the Configure menu and click

Broadcast

.

The

Broadcast

 window displays (

Figure 5-5

).

Figure 5-5. Broadcast Window

3.

Choose the

Broadcast Destination

 you need.

You can select

All

,

Async,

or

Virtual

. For instructions see The

Broadcast Window on page 5-13.

4.

Enter your message text in the

Broadcast Message

 box.

Your message can contain up to 128 characters in any number of
lines.

5.

Click

Apply

.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments