manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 177 / 351

Share
Download
Bay Networks 5391 Manual Download Page 177

8-3

Chapter 8    Configuring Modems

Managing Remote Access Concentrators Using Annex Manager

Figure 8-2. Modem Definition Confirmation Window

If you create a new modem definition or edit one that
exists in the RAC configuration file, your changes modify
the current file. If you edit a definition for which defaults
exist, Annex Manager copies the definition and places it
in the RAC configuration file. Use the

Revert to default

modem values

 button in this case to see the default values.

7.

Copy the configuration file to alternate load hosts and to self-
boot units.

See Editing and Creating Modem Definitions on page 8-7.

Changing Definitions for ISDN Primary Rate RACs

To edit a definition for ISDN Primary Rate RACs:

1.

Display the

Call Defaults

 window and click

 Edit Modem

.

The

Edit Modem

 window appears (

Figure 8-1

).

2.

Change existing values in the

Connect Status String

,

Dialin Setup

Command

, and

Dialout Setup Command

 fields.

3.

Click

OK

.

Annex Manager closes the

Edit Modem

 window and returns to the

Call Defaults

 window.

4.

Click

Apply

.

A confirmation window appears (

Figure 8-3

). Click

OK

 to continue

or

Cancel

 to return to the window.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments