Bay Networks 5391, Manual, Page: 292 / 351

Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-102
tni_clock defines the transmit clock for the T1 Network Interface. You can select:
•
looptiming
to use the recovered receive clock at the transmit
clock.
•
localtiming
to use the local clock as the transmit clock.
•
throughtiming
to use the recovered receive clock from the other
interface as the transmit clock.
tni_loop_bak_config
defines the DS1 interface loopback configuration. Users cannot access T1 lines
when you change this parameter value. You can select:
•
noloop
to prevent the signal from looping through the T1
engine.
•
payloadloop
to allow the incoming signal to be looped through
the T1 engine after it passes through the framing function.
•
lineloop
to cause the incoming signal to loop to the network
without passing through the T1 engine.
•
localloop
to cause the T1 engine outgoing signal to loop back to
the incoming side.
T1 lines are available to users only when you choose
noloop
.
Type
T1 DS1
Values looptiming, localtiming, throughtiming
Default looptiming
Lists
DS1 Line, T1_DS1
Type T1 DS1
Values noloop, payloadloop, lineloop, localloop
Default
noloop
Lists DS1 Line, T1_DS1