manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 64 / 351

Share
Download
Bay Networks 5391 Manual Download Page 64

Managing Remote Access Concentrators Using Annex Manager

Chapter 3    Determining RAC Status

3-28

•

Offhook Count

provides a count of the number of times the modem

went offhook on a call.

•

DCD Assert Count

provides a count of the number of times the

modem asserted DDC on a call.

•

Consecutive Failures

provides a count of the number of times the

modem failed to accept a call consecutively.

Displaying DVS Status Information

This section tells you how to view information for all active tunnel
interfaces.

To display this information:

1.

Create a RAC list (page 2-1) and select a single RAC from the
list.

2.

Select a single RAC that contains a tunnel from the list.

3.

On the Status menu click

DVS.

The

Annex DVS Status

 window appears (see

Figure 3-8

).

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments