manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 246 / 351

Share
Download
Bay Networks 5391 Manual Download Page 246

Managing Remote Access Concentrators Using Annex Manager

Appendix A    RAC Parameters

A-56

line_erase

allows a RAC using CLI to echo line erase for a video terminal. If you choose

enabled

, the RAC erases all characters on the line and moves the cursor back to

the beginning of the line. If you choose

disabled

, it echoes the line erase character

for hard-copy terminals, making the deleted line visible and positioning the print
head at the beginning of the next line.

load_broadcast

defines, during a boot, whether the RAC requests the configuration or message-
of-the-day files from other hosts. This parameter works only if the files are not
available on the preferred load host.

load_dump_gateway

specifies the gateway IP address. A gateway is required if the preferred load or
dump host is on a different network or subnet than the RAC.

Type

Async

Values

enabled or disabled

Default

enabled

Lists

Async Port, Command Line Editing

Type

RAC

Values

enabled or disabled

Default

enabled

Lists

RAC Only, Basic_RAC

Type

RAC

Values

IP address

Default

0.0.0.0 (no gateway)

Lists

RAC Only, Basic RAC

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments