manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 304 / 351

Share
Download
Bay Networks 5391 Manual Download Page 304

Managing Remote Access Concentrators Using Annex Manager

Appendix B    Configuring and Editing Scripts

B-8

Click

Cancel

 to return to the

Create Script

 window. When you click

Apply

 the

File Selection

 window displays.

6.

When the

Script File Selection

 window (

Figure B-4

) displays enter a

script file name for the new script and click

OK

.

Figure B-4. Script File Selection Window

The

Script File Selection

 window displays the default script

directory. It allows you to:

•

Overwrite an existing script that you created previously by
selecting its name. When you select an existing script name, a
window appears that allows you to verify your choice. You
cannot overwrite a script that someone else created.

•

Enter a new script name.

When you click

OK

 Annex Manager creates a new script with the

name you specified.

7.

Save Msgs

 displays the standard

File Selection

 window, which

includes the default text directory.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments