Bay Networks 5391 Manual Download Page 41

Page: 41 / 351

3-5

Chapter 3 Determining RAC Status

Managing Remote Access Concentrators Using Annex Manager

Displaying Asynchronous Port Status Information

This section describes how to view information about one or more
asynchronous ports for a RAC.

To view asynchronous port information for a single RAC:

Create a RAC list (page 2-1).

Select a single RAC from the list.

On the Status menu, click

Async Port Status

Not all devices support asynchronous ports. If the devices selected
do not support asynchronous ports, this option is grayed out.

The

Annex Async Port Status

window appears (

Figure 3-2

). The

name of the RAC you selected appears in the window title bar.

Figure 3-2

shows the window for three asynchronous ports.

The fields in this window are describe in The Annex Async Port
Status Window on page 3-6.

Figure 3-2. Annex Async Port Status Window

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 41 / 351

Search results

Summary of Contents for 5391

Reviews: