Bay Networks 5391 Manual Download Page 336

Page: 336 / 351

Managing Remote Access Concentrators Using Annex Manager

Appendix D Help Reference

D-2

Displaying Window Item Help

To display help about a field, box, or button:

Move the cursor to any field, box, or button.

You can use the mouse or

Tab

to move the cursor. Make sure that

the item you are selecting is highlighted.

Press

or click

Help

The

Window Item Help

window appears (

Figure E-1

shows a help message for the

Add

button in the

Main

window.

Figure E-1. Window Item Help

Acknowledging Help Windows

You can acknowledge this help window at any time:

Move the pointer to

Click the mouse button or press

Return

The help window closes.

You cannot save information directly from

Window Item Help

However, the help windows that appear include information on
each window element and allow you to save window contents.

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 336 / 351

Search results

Summary of Contents for 5391

Reviews: