Bay Networks 5391 Manual Download Page 299

Page: 299 / 351

B-3

Appendix B Configuring and Editing Scripts

Managing Remote Access Concentrators Using Annex Manager

Viewing Script Contents

To view a script:

On the

Main

window, select a single RAC.

Select

View Script

from the Commands menu.

The

View Script

window appears (

Figure B-1

). This window is

described

on page B-4

Figure B-1. View Script Window

Select a single script from the

Script List

box.

The field below this box displays your selection. You can enter a
path in the field to see a script stored in another directory. In this
case, the

Script List

box does not change.

Click

View

The script listed in the text field appears in the

Script Contents

box.

If you need to display more than one script, repeat steps 2 and 3.
The

Script Contents

box does not save previous selections.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 299 / 351

Search results

Summary of Contents for 5391

Reviews: