manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 179 / 351

Share
Download
Bay Networks 5391 Manual Download Page 179

8-5

Chapter 8    Configuring Modems

Managing Remote Access Concentrators Using Annex Manager

4.

Click

Remove

.

A confirmation window appears (Figure 7-4). Click

OK

 to continue

or

Cancel

 to return to the window.

Figure 8-4. Remove Modem Definition Confirmation Window

When you click

OK

 Annex Manager displays the

Edit Async Port

window. If you remove a definition that you created it does not
appear in the modem list. If you remove a definition that has a
default, the values of the definition revert to the default values and
its name remains in the list.

5.

Click

Apply

.

The

Reset Parameters

(

Figure 8-5

) window appears if you selected

the

Confirm Auto Reset

 option from the pull-down menu and if the

settings you changed require Annex Manager to reset RACs.   If
you did not select

Confirm Auto Reset,

 Annex Manager resets RACs

without notifying you.

Figure 8-5. Reset Parameters Window

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments