Bay Networks 5391 Manual Download Page 339

Page: 339 / 351

D-5

Appendix D Help Reference

Managing Remote Access Concentrators Using Annex Manager

The Help Window Format

The

Help

window that stores command and parameter help uses a box and

push buttons. If you keep this window open on your desktop, you can use
it to display one or more help messages at any time.

Reading the Help Window Box

The

Help

window displays information in a single box. They include:

•

An overview of each command.

•

Information about the format of the command window.

•

Descriptions of the fields, buttons, and boxes that comprise the
command window.

•

Special notes or warnings about using the command.

•

Short descriptions of each parameter eligible for Annex
Manager processing.

You can save help messages that appear in this box, but you cannot edit
them or delete portions of their text.

The

Help

window uses the following push buttons:

•

Clear

removes all existing text from the window.

•

Save Help

displays the standard

File Selection

window, which

allows you to save the contents of the window in a file.

•

removes the

Help

window from your display.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 339 / 351

Search results

Summary of Contents for 5391

Reviews: