manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 30 / 351

Share
Download
Bay Networks 5391 Manual Download Page 30

Managing Remote Access Concentrators Using Annex Manager

Chapter 2    Creating and Using RAC Lists

2-4

3.

The

Annex List Selection

 window displays the default list directory.

Although you can select another directory, it is efficient to save
RAC files in this directory.

4.

Either:

•

Select an existing list from the list names in the

Files

window. When you select an existing list, a window appears
that allows you to verify your choice. You cannot overwrite
a list that someone else created.

OR

•

Create a new list by entering a new file name in the

Files

window or a new path and name.

5.

Click

OK

.

Annex Manager saves the list in the file you specified.

Opening a RAC List

Open Annex List

 opens any list you previously saved so you can use it for

Annex Manager processing.

To open a saved list:

1.

Select the File menu and click

Open Annex List.

The

Annex List Selection

 window appears (

Figure 2-4

).

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments