Bay Networks 5391 Manual Download Page 139

Page: 139 / 351

5-9

Chapter 5 Booting and Resetting RACs

Managing Remote Access Concentrators Using Annex Manager

Figure 5-4. Reset Command Confirmation Window

Click

to reset the RAC or

Cancel

to return to the

Reset

window.

After you reset a RAC a warning window appears. This window
lists the RACs that were reset and, if necessary, lists RACs for
which

Reset

was unsuccessful.

Reset Window

The

Reset

window uses radio buttons, port type and port number fields,

and push buttons to apply parameter value changes to the RACs you
select.

The

Reset

window radio buttons define the options that Annex Manager

changes.

Reset

terminates active connections to a RAC when you use the

All

All Async Ports

All Printer Ports

All Virtual Ports

All T1 DS1 Ports

(Hard)

All T1 DS1 Ports (Soft)

All Internal Modems

Individual Ports, All

Internal Modems, Individual Internal Modems

Individual Internal Modems

and

PRI Line

options

You can choose one of these buttons:

•

All

resets all items listed in the remaining buttons.

•

Annex All

resets all items included in the

LAT

Macros

Message of

the Day

Name Server

, and

Security

buttons.

•

All Async Ports

resets the asynchronous ports.

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 139 / 351

Search results

Summary of Contents for 5391

Reviews: