Bay Networks 5391 Manual Download Page 169

Page: 169 / 351

7-21

Chapter 7 Configuring RAC Parameters

Managing Remote Access Concentrators Using Annex Manager

•

WAN Module Params

copies DS1 line parameter values

from one RAC and port.

Figure 7-13. Copy Window

Choose one RAC from the

Copy From

window.

This list displays only reachable RACs. If you need to add a RAC
to the list, you must return to the

Main

window and reissue the Copy

command. If your list contains only one RAC, you do not need to
select it.

Choose a port type.

You can choose a port type only if you choose the

Main Window

Params

option. The port type you choose must correspond to the

port type in the parameters you selected in the

Main

window.

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 169 / 351

Search results

Summary of Contents for 5391

Reviews: