manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 164 / 351

Share
Download
Bay Networks 5391 Manual Download Page 164

Managing Remote Access Concentrators Using Annex Manager

Chapter 7    Configuring RAC Parameters

7-16

The selections for

Main Window Params

 are:

•

Main Window Params

 to compare values based on the

parameter options you selected in the

Main

 window.

•

Annex Only Params

 to compare all parameters, excluding

port parameters.

•

Async Port Params

 to compare asynchronous port

parameter values.

•

Printer Port Params

 to compare printer port parameter

values.

•

Enet Port Params

 to compare Ethernet port parameter

values.

•

WAN Module Params

to compare WAN module

parameter values.

•

A RAC and a script, the left-hand box displays the RAC list
and the right-hand box displays the default script directory.
A message can appear below the

Compare Options

window

reminding you that the port you enter substitutes for the
wild card ports of the script. The port type button and port
number field display below the Annex list box. You can
select a single RAC from the list. If the script you select
contains wild card ports, you must enter a port type and
number.

The script selection field displays below the

Script List

 box. If you

select an existing script, its directory and file name appear in the
field. If you want to compare a script stored in another directory,
enter its directory and name in the selection field.

Figure 7-11

shows the window for the

Annex vs. Script

 option.

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments