Bay Networks 5391 Manual Download Page 126

Page: 126 / 351

Managing Remote Access Concentrators Using Annex Manager

Chapter 4 Setting Up RACs

4-52

Figure 4-18. IPX Window

Select the desired frame type.

Optionally click

Restore

to return to the original frame type. (You

cannot do this if you have already clicked

Apply

Click

Apply

. Annex Manager sets the frame type you selected for

the selected RACs.

Click

to close the window.

LAT

The LAT function lets you view and change server names and group codes
for RACs you selected that use the LAT protocol.

To configure LAT:

Create a RAC list and select the RACs you want to configure
(page 2-1).

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Search results

Summary of Contents for 5391

Reviews:

Bay Networks 5391, Manual, Page: 126 / 351

Search results

Summary of Contents for 5391

Reviews: