manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 23 / 351

Share
Download
Bay Networks 5391 Manual Download Page 23

1-3

Chapter 1    Starting Annex Manager

Managing Remote Access Concentrators Using Annex Manager

Figure 1-4. Main Window with Annex List

Setup and Customize Modes

Annex Manager provides two modes:

•

Setup mode allows you to configure one or more RACs quickly.
It provides a series of windows that allow you to choose basic
RAC and port settings. The

Main

 window appears in Setup

mode when Annex Manager appears on your desktop.

•

Customize mode allows you to set any RAC parameter. You can
choose parameter values using a group of related parameters, or
you can select one or more individual parameters.

Setup Mode

The

Main

 window first appears in Setup mode (

Figure 1-5

).

W

ARNING

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments